Extraction

Extracting damp air at its source is the most effective way to maintain your Indoor Air Quality, and to prevent mould and mildew from growing.

Constant extraction at very low levels, even when your shower is off, removes any remaining moisture while drawing in better quality air in and around your bathroom.

Our System
Our extraction systems use custom-made, fully automatic fans with built-in sensor controls, to provide you with the best protection for you and your bathroom. These fans constantly monitor the humidity levels and remove all excess moisture from your bathroom - without ever needing to flick a switch.

Extraction VX125E

Our 125mm extraction system that will work for most standard-sized bathrooms and laundry spaces - up to 9m² in size.

Extraction VX150E

Our 150mm extraction system for larger bathrooms or bathrooms with major condensation issues - 9m² or larger.

Extraction VX150TW

Thru-wall or thru-ceiling bathroom extraction option, for bathrooms that don't have an accessible ceiling cavity.

FAQ

Is there a recommended place to install the fan?

Extraction fans should be placed within 1.5m of the extraction vent to ensure optimal operation.

When do I need a backdraft shutter for my extraction system?

Normally, our bathroom extraction systems do not require any backdraft shutters. However, if your house is built in a high-wind zone, it may become necessary to add a backdraft shutter to prevent bad (especially wet and humid) air from outside being blown into your bathroom on windy days.

What is constant extraction?

Rather than turn the fan off when the light is turned off after a shower constant extraction removes the remaining moisture from the bathroom while drawing in better quality air at very low levels even when your shower is off.

Do I need to change the set temperature between summer and winter?

No. Our system automatically adjusts the airflow according to the quality of the available air – the better the air quality, the faster the fan will run. This makes set points irrelevant for the fan operation. We recommend a set temperature of 23°C at all times.

Close Bitnami banner
Bitnami